ASW610
ASW610’s long-throw 250mm driver allows it to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool.
Fill the room with bass, not speakers
ASW610 is compact, making it a subwoofer you can squeeze in anywhere. Or maybe use two for more bass control?
Sealed tight
ASW610’s sealed enclosure keeps the bass good and tight (and exciting!).
Size & weight
Dimensions
Height: 310mm (12.2 in) not including feet or spikes
322mm (12.7in) including feet
338mm (13.3in) including spikes
Width: 310mm (12.2 in)
Depth: 347mm (13.66in) not including grilles
375mm (14.8 in) including grilles and controls
Net Weight
12.5kg (27.6 lb)
Technical details
Technical features
Input level (line in)
Input level (speaker in)
Low-pass filter frequency (line in only)
Low-pass filter bypass
Bass extension
Bass roll-off alignment
Auto sense on / standby
Phase switch
Drive Units
ø250mm (10 in) Paper / Aramid fibre cone long-throw
Frequency response
±3dB 27Hz – 40 / 140Hz adjustable (EQ at A)
Amplifier power output
200W
Input impedance
33kΩ
Bass extension
-6dB at 20Hz (position A)
-6dB at 25Hz (position B)
-6dB at 30Hz (position C)
Frequency range
-6dB at 20Hz and 25 / 140Hz adjustable (EQ at A)
Power consumption
40W / 0.5W standby
Inputs
Line in (RCA Phono)
Speaker in (Binding post)
12v trigger (3.5mm jack)
Low-pass filter
Active 4th-order, variable cut-off frequency
Signal / Noise
>90dB
Finishes
Cabinet finishes
Black
White
Grille finishes
Black
Grey
Carton Contents:
Check in the carton for:
1 Mains cable
1 Accessory pack containing:
4 M6 spike feet
4 M6 rubber feet
4 Lock nuts (10mm across flats)
