2504 REGHER
Product characteristics
- Outputs can be operated manually, construction site mode
- Blind/shutter position directly controllable
- Acknowledgement of the blind/shutter position in bus and manual mode
- Safety function: rain alarm, frost alarm, 3 independent wind alarms
- Integration into the temperature management of the building
- Disabling of individual outputs manually or via bus
- No central function
- No end position detection
- No feedback for drive movement
- No sun protection
- No scene function
- No forced position
- No fabric-stretching
Technical data
| KNX medium: | TP 256 |
| Rated voltage: | AC 110 V (−10 %) … 240 V (+10 %) |
| Mains frequency: | 50/60 Hz |
| Switching voltage: | AC 250 V ~ |
| Switching current AC 250 V: | 6 A |
| Switching current DC 12/24 V: | 6 A |
| Switching current DC 48 V: | 3 A |
| Connection, power supply and load | |
| Connection mode: | screw terminals |
| single wire: | 1 x 0.5 … 4 mm² |
| stranded without ferrule: | 1 x 0.5 … 4 mm² |
| stranded with ferrule: | 1 x 0.5 … 2.5 mm² |
| Max. blind/shutter running time: | 20 min |
| Mounting width: | 72 mm (4 rail units) |
| Ambient temperature: | −5 … +45 °C |
| Storage/transport temperature: | −25 … +70 °C |
| Power loss: | max. 4.5 W |
| Rated voltage KNX: | DC 21 … 32 V SELV |
| Power consumption KNX: | typical 150 mW |
| Connection, KNX: | terminal |
| Approvals: | VDE |
