ROOM ACTUATOR 110-230 V

Intended use

• Switching of AC 110 … 230 V electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Heating outputs: electronic outputs for switching electrothermal valve drives

Product characteristics

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Scene function
• Disabling of individual outputs manually or via bus

Switching function

• Operation as NO or NC contacts
• Logic operation and forcing function
• Feedback function
• Central switching function with collective feedback
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function

Blinds function

• Suitable for 110 … 230 V AC motors
• Blind/shutter position directly controllable
• Slat position directly controllable
• Feedback of movement status, blind/shutter position and slat position
• Forced position through higher-level controller
• Safety function: rain alarm, frost alarm, 3 independent wind alarms
• Sun protection function

Control of valve drives 230 V

• Switching operation or PWM operation
• Actuators with characteristics “normally open” or “normally closed” can be controlled
• Overload-protected, short circuit-protected
• Emergency operation in case of bus voltage failure for summer and winter
• Protection against jamming valves
• Forced position
• Cyclical monitoring of the input signals can be parameterised