2103 REG ES
Product characteristics
The energy detector has three channels for connecting loads to up to three separate phases with a common neutral conductor. Each channel can measure:
- Voltage (eff.)
- Current (eff.)
- Active power
- Reactive power
Additionally, the active power and reactive power of all channels will be summed up and displayed as three-phase power values along with the mains frequency.
According to the parameterisation the measured values will be transmitted on the KNX bus, either cyclically and / or when the value changes. An additional telegram will be transmitted if certain values exceed or fall below a specified limit.
The following meters exist for each channel and for the three-phase values:
- 1 x energy meter total
- 1 x energy meter ¼ h value
- 3 x energy meter n
- 3 x energy intermediate meter n
New in version 01
- Direct measurement (without transformer)
- Transformer measurement (with external 75 A transformer, ratio 75:5, e.g. Phoenix Contact order key 2277611)
Technical data
| Power supply via E1/N | |
| Rated voltage: | AC 110 … 240 V ~ |
| Mains frequency: | 50/60 Hz |
| Power consumption: | max. 2 W |
| Inputs E1 … E3 | |
| Rated voltage range: | AC 110 … 240 V ~ |
| Rated current range: | 4 mA … 16 A |
| Rated frequency: | 50/60 Hz |
| Measurands: | voltage (rms value) current (rms value) frequency active power (signed +/-) reactive power (signed +/-) active energy (signed +/-) |
| External transformer | |
| Transformation ratio: | 75:5 |
| Secondary current: | 0 … 5 A |
| Accuracy | |
| Direct measurement (without transformer): | 1 % of 200 mA … 16 A |
| Transformer measurement (75 A transformer, class 1): | 2 % of 7.5 A … 75 A |
| Pulses LED | |
| Direct measurement (without transformer): | 6400 / kWh |
| Transformer measurement (75 A transformer): | 427 / kWh |
| Pulse duration: | 4.9 ms |
| Power loss | |
| Voltage measurement: | ≤ 0.03 W / phase |
| Current measurement: | ≤ 0.8 W / phase |
| Power consumption from mains: | < 1 W |
| Connection | |
| Connection mode: | screw terminals |
| single wire: | 1 x 0.5 … 2.5 mm² |
| stranded without ferrule: | 1 x 0.5 … 2.5 mm² |
| stranded with ferrule: | 1 x 0.5 … 2.5 mm² |
| Ambient temperature: | −5 … +45 °C |
| Storage/transport temperature: | −25 … +70 °C |
| Mounting width: | 72 mm (4 rail units) |
| KNX medium: | TP 256 |
| Rated voltage KNX: | DC 21 … 32 V SELV |
| Current consumption KNX: | typical 10 mA |
| Connection, KNX: | terminal |
