BM 360 MB WW
Intended use
- Brightness-independent detection of motions in interior areas
- Connection to KNX e.g. multi station or push-button interface for automatic switching of loads
- Power supply via unchoked output of a (KNX) power supply with SELV
- Clamp mounting in suspended ceilings
- Ceiling installation on fixed ceilings in flush box according to EN 60670-1 with flush mounting set (ref.-no.: PMM-UP-SET-WW)
- Surface-mounted ceiling installation with surface mounting set (ref.-no.: PMM-AP-SET-WW)
Technical data
| Rated voltage: | DC 24 … 32 V SELV |
| Stand-by power: | < 0.1 W |
| Current consumption: | max. 4 mA |
| Ambient temperature: | −5 … +45 °C |
| Storage/transport temperature: | −25 … +70 °C |
| Relative humidity: | 10 … 100 % (no condensation) |
| Protection class: | III |
| Protection level: | IP 44 |
| Motion detection | |
| Detection angle: | 360° |
| Range: | Ø approx. 6 m (mounting height 3 m) |
| Shut-off delay: | approx. 10 s |
| Switching output | |
| Electric strength: | 40 V |
| Current carrying capacity of device: | max. 50 mA |
| Connected load: | max. 0.15 W |
| Dimensions | |
| Ceiling cut-out (Ø x D): | 44 x 35 mm |
| Dimensions (Ø x H): | 53.5 x 38 mm (with design ring) |
| Cable length: | max. 30 m |
| Max. thickness of the suspended ceiling: | approx. 25 mm |
| Installation depth: | min. 35 mm |
| Distance between concrete ceiling and suspended ceiling: | min. 20 mm |
| Design ring Ø inside: | 35.6 mm |
| Design ring Ø outside: | 53.5 mm |
| Profile height design ring: | 1.8 mm |
| Profile height lens: | 5.5 mm |
